1. Extruder: 1 set
(1) Automatic screw type loading machine: 1 set
(2) Screw diameter: Φ100MM
(3) Screw L/D:1:33
(4) Screw material: 38GrMoAl and alloy plating on the surface of screw.
(5) Max. output: 300KG/H(Depending upon tape characteristics and material)
(6) Barrel heating use cast aluminum heating band, Solid relay control the heating and equip the cooling fan.
(7) Die use inlay stainless steel heating pipe, Solid relay control the heating
(8) Die length: 1300MM
(9) Metering pump:1 set
(10) Drive power of metering pump:11kw
(11) Filter changer: Automatic double belt changer.

2. Cold water tank: 1 set
(1) Material: Stainless steel 304.
(2) Up and down adjustable

3. Dry system: 1 set
(1) Water removal plate: 2 sets
(2) Squeeze device: 1 set
(3) Lifting device: 1 set,
(4) Suction device: 2 sets

4. Film slitting device: 1 set
(1) Screw diameter: 90mm, Rotation speed of screw: 0～80 rpm.
(2) L:D: 33:1, the screw is suitable for HDPE/PP Virgin.
(3) Manual filter changer or automatic hydraulic filter changer:1 set
(4) Use the pressure automatic feedback system to adjust the screw automatically which could ensure the uniform of yarn.
(5) Material of barrel heater: Cast aluminium with stainless steel insulation layer.
(6) Electric heating round spinneret
(7) Ceramic heating rings for spinneret with SS insulating layer make the heat evenly.

5. Cold water tank: 1 set
(1) The tank is made by SS 304.
(2) Pushed and pulled in side way, the manual lifting.

6. First 7-unit roller system:1 set
(1) Seven pieces variable diameter roller
Five rollers are covered with rubber to resist skidding.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-out oil lubrication system which makes the gears runs steady.

7. Hot water tank:1 set
(1) The tank is made by SS 304 with the insulating layer
(2) Double pressure rollers equip with twin cylinder opening device.

8. Second 7-unit roller system:1 set
(1) Seven pieces variable diameter roller, all rollers are coated with hard chrome.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.

9. Waster yarn collectors system: 80KG.cm

10. Winding machine:1 set
(1) Cops winder or spool winder.
(2) Winding bobbin: inner diameter 38mm× L 280mm
(3) To-and-fro motor power: inverter control