1. Extruder: 1 set
(1) Screw dia.: 70mm; 
(2) L:D: 30:1; Material of screw: 38CrMoALA; The screw is special design for PET chips.
(3) Hard tooth reducer: Jiangyin Gearbox manufactuer.
(4) Pressure automatic feedback system which adjust the screw speed.
(5) Melt filter: manual type
(6) Pressure sensor and gauges: Shanghai
(7) 30cc Metering pump:1 set
(8) Driving power of metering pump: 3.7kw
(9) Heater: Electric heating ring.
(10) Spinneret device: 1 Set

2. Cold water tank: 1 set
(1) The tank is made by Stainless Steel 304.
(2) Use big window.

3. First 7-unit roller system:1 set
(1) Roller size: φ270×750×7,
(2) Power of motor: 7.5KW
(3) Steel cabinet with accurately grind gear.
(4) Driving motor and reducer is from Zhejiang Tongli Reducer Co., Ltd.
(5) The center height is 1100mm

4. Hot water Tank:1 set
(1) Size (L×W×H) : 4000×800×1100 mm
(2) Heating power: 35KW; Electrical heating.
(3) Material is stainless steel 304.
(4) Equip one moisture absorption device: 4KW

5. Second 7-unit roller system:1 set
(1) Roller size: φ270×750×7,
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear makes the roller run smoothly.
(4) Equip one pressing rollers
(5) The center height is 1100mm

6. First single-layers hot oven tank: 1 set
(1) Fan power: 2.2KW×2 sets.
(2) Heating power: 23KW
(3) Oven length: 4300 mm

7. Third 7-unit roller system:1 set
(1) Roller size: φ270×750×7
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear makes the roller run smoothly.
(4) Driving motor and reducer:Zhejiang Tongli Reducer Co., Ltd.
(5) The center height is 1100mm

8. Second single-layers hot oven tank: 1 set
(1) Fan power: 2.2KW×2 sets,
(2) Heating power: 23KW
(3) Oven length: 5000 mm

9. Fourth 7-unit roller system:1 set
(1) Roller size: φ270×750×7
(2) Power of motor: 7.5KW
(3) Steel cabinet with accurately grind gear makes the roller run smoothly.
(4) Driving motor and reducer is from Zhejiang Tongli Reducer Co., Ltd.
(5) The center height is 1100mm

10. Oil system: 1 set

11. Waster yarn collectors system: 1 set

12. 300 spindles winding machine
(1) The frame transmission is frequency control, driving motor: 2.2kw
(3) Each spindle has on/off switch. Each screen has one voltage regulator.