1.Extruder ：1 set
Material: PP PE Virgin
Screw barrel brand: Jinhai screw
Screw diameter: Φ90MM
Screw L/D:1:33
Screw material: 38GrMoAl
Screw max. rotation: 120r/min
Barrel heating use cast alumunium heating band, Solid relay control the heating
Barrel total heating power and zones: 35KW
Surface hardened Gearbox brand
Die use inlay stainless steel heating pipe, Solid relay control the heating
Die length: 1000MM
Film thickness: 0.07MM-0.35MM
die total heating power and zones: 12KW
Main motor: Siemens(China) AC motor
Motor power:30KW
Screen change method: auto-belt change screen
Loading system: vacuum
Loading system brand: shini

2. Cold water tank: 1 set
Material: Stainless steel
Up and down adjustable

3. Lifting Film broken pulling device: 1 set
Squeezing water rubber roller: 1 set
Lifting device 1set motor power: 3KW
Squeezing water device: 1 set
Water suction device fan power: 3kw
Film broken device 1set
Characters: up and down, sideway movable
Pulling roller 2sets
Roller outer diameter: Φ185MM
Roller surface treatment: Hard Cr surface polished finish or mirror
treatment
Motor power: 5.5KW
Max. Speed : 55 m/min
For direct return of narrow edge trims of non-stretched film into the
extruder, consisting of a shredding mill with blower, piping and airseparator (cyclone).
Shredding Mill Motor 2.2 kW
Blower Motor 2.2 kW

4. Stretching drying plate 1set
Drying plate length: 3500MM
Drying plate width: 850MM
Drying plate thickness: 16mm
Drying plate surface treatment:hard chromium plating and polishing
Heating power: 12KW
Drying plate equip with heat preservation upper cover, pneumatic to open

5. 7-unit roller system:1 set
Steel roller dimension: Φ315x850mm
Roller surface treatment: hard chromium plating, glazing treatment.
Stretching 5-roller motor power: 15KW
Setting 2-roller motor power: 4KW
Max. Speed 280 m/min

6. Fiber system 1set
Motor power:5.5Kw

7. Waste yarn collection system one set
Motor power 7.5KW

8. Wingding machine

9. Electrical control system: 1set

10. Machine weight: about 252T