1. Extruder: 1 set
(1) Main motor power: 45KW; Motor is from Siemens electric machine Co., Ltd
(2) Screw diameter: 42mm; Rotation speed: 0～70rpm
(3) Screw material: CE-150, barrel material: CB-150
(4) L/D=48, total 12 section barrel. 
(5) Hard tooth reducer: Jiangsu
(6) Pressure sensor and pressure gauges for spinneret
(7) Screw heater: Cast aluminium heating rings with stainless steel insulation layer.
(8) Electrical heating spinneret device: 1 set
(9) Heater: Electric heating ring, heating power: 4kw
(10) Equip two hoppers for each material.

2. Cold water tank: 1 set
(1) Stainless Steel 304 tank

3. First 7-unit roller system:1 set
(1) Roller size: φ270×400×7, All rollers are heated roller.
(2) Equip one oil heating controller. 
(3) Power of motor: 5.5KW
(4) Steel cabinet with accurately grind gear makes the roller run smoothly.
(5) Reducer is from Jiangsu Guomao Reducer Co., Ltd.
(6) Built-out oil lubrication system which makes the gears run steady.

4. First hot oven tank:1 set
(1) Fan power: 2.2KW×2 sets
(2) Heating power: 23KW
(3) Oven length: 4300 mm
(4) Special design of hot air channel which make the temperature evenly.

5. Second 7-unit roller system:1 set
(1) Roller size: φ270×400×7,
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.
(5) The center height is 1100mm

6. Second hot oven tank: 1 set
(1) Fan power: 2.2KW×2 sets.
(2) Heating power: 23KW
(3) Oven length: 4300 mm

7. Third 7-unit roller system:1 set
(1) Roller size: φ270×400×7
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.

8. Third hot oven tank: 1 set
(1) Fan power: 2.2KW×2 sets,
(2) Heating power: 23KW
(3) Oven length: 5000 mm

9. Fourth 7-unit roller system:1 set
(1) Roller size: φ270×400×7
(2) Power of motor: 7.5KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.

10. Hot blast setting oven tank: 1 set
(1) Fan power: 2.2KW×2 sets,
(2) Heating power: 23KW
(3) Oven length: 5000 mm

11. Fifth 7-unit roller system:1 set
(1) Roller size: φ270×400×7
(2) Power of motor: 7.5KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.

12. Oil system: 1 set

13. Waster yarn collectors: 1 set