1. Extruder: 1 set
(1) Screw diameter: 80mm, Rotation speed of screw: 0～72 rpm.
(2) L:D: 33:1, the screw is suitable for PE chips.
(3) Aautomatic screen changer:1 set
(4) Use the pressure feedback system to adjust the screw speed
(5) Material of barrel heater: far infrared
(6) Round spinneret
(7) Ceramic heating rings for spinneret with SS insulating layer make the heat evenly.

2. Cold water tank: 1 set
(1) The tank is made by SS 304.
(2) Pushed and pulled in side way, the manual lifting.

3. First 7-unit roller system:1 set
(1) Seven pieces variable diameter roller, five rubber rollers.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-out oil lubrication system which makes the gears runs steady.

4. Hot water tank:1 set
(1) The tank is made by SS 304 with the insulating layer
(2) Double pressure rollers equip with twin cylinder opening device.

5. Second 7-unit roller system:1 set
(1) Seven pieces variable diameter roller, all rollers are coated with hard chrome.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.

6. Waster yarn collectors: 80KG.cm

7. Winding machine
(1) Tapered winder
(2) Winding bobbin as per custome’s request.
(3) Tension controlled by inverter.