1. Extruder: 1 set
(1) Screw A diameter: 50mm; Rotation speed: 0～72rpm.
(2) Screw B diameter: 40; Rotation speed: 0～72rpm.
(3) L:D: 33:1; material of screw: 38CrMoALA ；
The screw structure is special designed for PP/PE virgin material.
(4) Electrical heating spinneret device: 1 set
(5) Heater: Electric heating ring to ensure the temperature stabilization.
(6) Metering pump: 2 sets, rotation speed 0-45rpm.

2. Cold water tank: 1 set
(1) The tank is made by stainless steel 304.
(2) The height of tank is horizontal pushing structure is conveniently to disassembly the spinneret.

3. First 7-unit roller system:1 set
(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.
(2) Steel cabinet with accurately grind gear makes the roller run smoothly.
(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.
(4) Built-out oil lubrication system which makes the gears run steady.

4. Hot water tank:1 set
(1) Heating power: 27kw, two zones heater.
(2) Double pressure rollers with twin cylinder opening system which is controlled by electromagnetic valve.

5. Second 7-unit roller system:1 set
(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.
(2) Steel cabinet with accurately grind gear makes the roller run smoothly.
(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

6. Single-layer hot oven tank: 1 set
(1) Fan power: 2.2KW×2 sets
(2) Heating power: 23KW
(3) Oven length: 5000 mm

7. Third 7-unit roller system:1 set
(1) Seven variable diameter rollers made by steel pipe with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs steady.

8. Oil system: 1 set
(1) Frequency control of speed

9. 180 spindles winding machine
(1) Tube is according to the client’s requirements.
(2) The frame transmission is frequency control, driving motor: 2.2kw
(3) Tension controlled by inverter
(4) Winding motor: 5KG

10. Electrical control system: 1 set