1. Extruder: 1 set
(1) Screw diameter: 70mm, Rotation speed of screw: 0～80 rpm. Screw: Zhejiang Zhoushan.
(2) L:D: 30:1, Material of screw: 38CrMoALA ,
(3) Material of barrel heater: Cast aluminium with stainless steel insulation layer.
(4) Metering pump: 1 set, rotation speed: 0-45 rotation.
(5) Customized hopper: 1 set

2. Cold water tank: 1 set
(1) The tank is made by SS 304.

3. First 5-unit roller system:1 set
(1) Seven variable diameter rollers, material: steel roller with hard chrome plating.
(2) Steel box with accurately grind gear makes the rollers run smoothly.

4. Overflow type hot water tank:1 set
(1) Tank size: 4000mm
(2) Heating power: 45KW in 2 zones,
(3) Water circulating water pump 2 sets

5. Second 5-unit roller system:1 set
(1) Seven variable diameter rollers, material: steel roller with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

6. First Single-layer hot oven tank:1 set
(1) Oven length: 4000 mm

7. Third 5-unit roller system:1 set
(1) Seven variable roller, material: Steel pipe with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

8. Second Single-layer hot oven tank:1 set
(1) Heating power: 22.5kw
(2) Special design of hot air channel.

9. Fourth 5-unit roller system:1 set
(1) Seven variable roller, material: Steel pipe with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.

10. Oil system: 1 set
(1) Frequency control of speed

11. 180 spindles winding machine
(1) Bobbin: Cops winder.
(2) Winding motor: 5KG
(3) Max design speed: 0-180m/min