1. Extruder: 1 set
(1) Screw diameter: 80mm,Screw: Zhejiang Zhoushan.
(2) L:D: 30:1, Material of screw: 38CrMoALA ,
The screw is suitable for PET chips and bottle flakes.
(3) Pressure automatic feedback system can adjust the screw speed automatically.
(4) Material of barrel heater: Cast aluminium.
(5) Metering pump 30cc, rotation speed: 0-45 rotation.
(6) Round spinneret: 1 set.
(7) Dosing unit: 1 set

2. Cold water tank: 1 set
(1) The tank is made by SS 304.
(2) Using heating pipe, power:18KW.
(3) Equip one suction device under the yarn support plate.

3. First 7-unit roller system:1 set
(1) Seven variable diameter rollers which made by stainless steel 304.
(2) Steel box with accurately grind gear makes the rollers run smoothly.
(3) Built-out oil lubrication system.Bearings: TIMKEN-TWB.
(4) Equip water collecting plate at bottom.

4. Overflow type hot water tank:1 set
(1) Tank size: 4000mm
(2) Heating power: 45KW in 2 zones, Electric heating pipe is in the tank.
(3) The tank is made by SS 304 with insulating layer.
(4) Water removal device: 2 sets with 5.5kw fan.
(5) Water circulating water pump 2 sets

5. Second 7-unit roller system:1 set
(1) Seven variable diameter rollers which made by steel pipe.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system. Bearings: TIMKEN-TWB.
(4) Equip 1 pressing roller at exit.

6. First double-layer hot oven tank: 1 set
(1) Oven length: 4000 mm
(2) Special design of hot air channel.

7. Third 7-unit roller system:1 set
(1) Seven variable diameter rollers which made by steel pipes.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system. Bearings: TIMKEN-TWB.
(4) Equip 1 pressing roller at exit.

8. Second double-layer hot oven tank: 1 set
(1) Oven length: 5000 mm
(2) Special design of hot air channel.

9. Fourth 7-unit roller system:1 set
(1) Seven variable diameter rollers which made by steel pipes.
(2) Steel structure box with accurately grind gear makes the rollers run smoothly.
(3) Built-in oil lubrication system.
(4) Equip 1 pressing roller at exit.

10. Oil system: 1 set
(1) Frequency control of speed
(2) Material: All made by SS 304

11. 180 spindles winding machine: 1 set
(1) Bobbin: /F7 (option).
(2) The frame transmission is frequency control, driving motor: 2.2kw
(3) The frame transmit by gear rack

12. Waster yarn collectors: 1 sets
13. Total installation power: 450KW
14. Total weight: 28T