1. Extruder: 1 set
(1) Automatic screw type loading machine: 1 set
(2) Screw diameter: Φ120MM
(3) Screw L/D:1:33
(4) Screw material: 38GrMoAl and alloy plating on the surface of screw.
(5) Barrel heating use cast aluminum heating band
(7) Die use inlay stainless steel heating pipe.
(8) Die length: 1800MM
(9) Metering pump:1 set

2. Cold water tank: 1 set
(1) Material: Stainless steel 304.

3. Dryer system: 1 set
(1) Water removal plate: 2 sets
(2) Squeeze device: 1 set

4. Film slitting device: 1 set
(1) Cutter shaft: Aluminum
(2) The cutter shaft can be adjusted.

5. First 7-unit roller system:1 set
(1) Outside diameter of roller: 180mm
(2) Motor power: 5.5kw
(3) Edge-film crushing recycling system: 1 set

6. Double-layers hot oven tank: 1 set
(1) Oven length: 6000MM
(2) Oven width: 1600MM
(3) Heating power: 80kw

7. Second 4-unit roller system:1 set
(1) Roller size: Φ415MMx1350MM
(2) Two cooling rollers, Two heating roller.
(3) Roller treatment: Hard chromium plating.
(4) Needle roller: 1 set

8. First 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.

7. Second 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.

8. Third 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.

9. 80 spindles winding machine:1set

10. Waster yarn collector: 1 set