1. Extruder: 1 set
(1) Automatic screw type loading machine: 1 set
(2) Screw diameter: Φ100MM
(3) Screw L/D:1:33
(4) Screw material: 38GrMoAl and alloy plating on the surface of screw.
(5) Barrel heating use cast aluminum heating band
(7) Die use inlay stainless steel heating pipe, Solid relay control the heating
(8) Die length: 1500MM
(9) Metering pump:1 set

2. Cold water tank: 1 set
(1) Material: Stainless steel 304.

3. Dryer system: 1 set
(1) Water removal plate: 2 sets
(2) Squeeze device: 1 set
(3) Lifting device: 1 set,

4. Film slitting device: 1 set
(1) Material of cutter shaft: Aluminum
(2) The cutter shaft can be adjusted up and down and around.

5. First 5-unit roller system:1 set
(1) Outside diameter of roller: 180mm
(2) Motor power: 5.5kw
(3) Max linear speed: 40m/min.
(4) Edge-film crushing recycling system: 1 set

6. First double-layer hot oven tank: 1 set
(1) Oven length: 6000MM
(2) Oven width: 1600MM
(3) Heating power: 80kw
(4) Fan power: 5.5KW×2 sets

7. Second 4-unit roller system:1 set
(1) Roller size: Φ415MMx1350MM
(2) Two cooling rollers, Two heating roller.
(3) Roller treatment: Hard chromium plating.
(4) Motor power: 15KW x 2 sets
(5) Needle roller: 1 set

8. First 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

7. Second 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

8. Third 2-unit roller setting system: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

9. 80 spindles winding machine:1set

10. Waster yarn collector: 1 set