1. Extruder: 1 set
(1) Automatic screw type loading machine: 1 set
(2) Screw diameter: Φ100MM
(3) Screw L/D:1:33
(4) Screw material: 38GrMoAl and alloy plating on the surface of screw.
(5) Max. output: 300KG/H
(6) Barrel heating use cast aluminum heating band
(7) Die use inlay stainless steel heating pipe, Solid relay control the heating
(8) Die length: 1300MM
(9) Metering pump:1 set
(10) Drive power of metering pump:11kw
(11) Filter changer: Automatic double belt changer.

2. Cold water tank: 1 set
(1) Material: Stainless steel 304.

3. Filter lifting and dryer system: 1 set
(1) Water removal plate: 2 sets
(2) Squeeze device: 1 set
(3) Lifting device: 1 set,

4. Film slitting device: 1 set
(1) Material of cutter shaft: Aluminum
(2) The cutter shaft can be adjusted up and down and around.

5. Roller system: 2 sets
(1) Outside diameter of roller: 180mm (Bearing: TWB)
(2) Motor power: 5.5kw
(3) Max linear speed: 40m/min.
(4) Edge-film crushing recycling system: 1 set

6. Double-layers hot oven tank: 1 set
(1) Oven length: 6000MM
(2) Oven width: 1600MM
(3) Heating power: 80kw
(4) Fan power: 5.5KW×2 sets
(5) Inner heating pipe, SCR temperature controller.

7. 4-unit roller system:1 set
(1) Roller size: Φ415MMx1350MM (bearing: TWB)
(2) Two cooling rollers, Two heating roller and one rubber pressuring roller.
(3) Roller treatment: Hard chromium plating and mirror treatment on the surface.
Equip European standard safety protective shield.
(4) Motor power: 15KW x 2 sets
(5) Needle roller: 1 set for fibrillated.
(6) Motor power: 7.5kw

8. First 2-roller setting machine: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

7. Second 2-roller setting machine: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

8. Third 2-roller setting machine: 1 set
(1) Roller size: Φ415MMx1350MM
(2) Two heating roller.
(3) Motor power: 5.5kw

9. Energy conservation winder: 80 spindles
(1) Wind top line speed: 150m/min

10. Waster yarn collector: 1 set
(1) Motor power: 11Kw